Loading ...
Loading ...
Loading ...
WORKSHOP TOOLS
ABS Bleeding
ABS BLEEDING
The ABS Bleeding function is available for Chrysler, GM, Hyundai/KIA, Mazda, Toyota, Ford, Honda, Nissan,
Mitsubishi, Subaru, Volvo, Mercedes, Volkswagen, BMW, and Jaguar vehicles only. Procedures vary between
vehicle makes and models.
NOTE: If an error occurs while performing ABS Bleeding procedures, an “advisory”
message display. Tap Exit or Back, as necessary, to return to the Workshop Tools.
NOTE: If ABS bleeding is not supported for the vehicle under test, an “advisory”
message display. Tap OK to return to the Workshop Tools.
1. Tap ABS Bleeding on the Workshop Tools screen.
n One or more sub-menus will display. Select the desired options, then proceed to step 2.
2. One or more “informational/ instructional” screens display.
n Perform test procedures as directed. Tap Next to scroll to the next step.
3. For some vehicles, “status” screens display as each phase of the calibration procedure is successfully complete.
Tap Next to scroll to the next step.
n A “results” message displays when the procedure has completed.
4. Tap End to close the results message.
5. Tap Back to return to the Workshop Tools screen.
DPF RESET (
Except Chrysler, GM, Nissan, or Volkswagen)
NOTE: If the vehicle under test is not a diesel vehicle, an “advisory” message
display. Tap Back to return to the Workshop Tools. DPF Reset is not available for
your vehicle.
1. Tap DPF Reset in the Workshop Tools screen.
n A “One moment please…” message displays, followed by the DPF Reset menu.
2. Tap DPF Regeneration Procedure.
n The DPF Regeneration Procedure screen displays.
NOTE: If the vehicle under test does not support DPF Regeneration Procedure, an
“informational” screen displays the procedures for “passive” DPF reset. Tap OK to
return to the DPF Reset Menu.
3. Tap Next to continue.
n An “informational” screen displays the procedures for “passive” or “active” DPF regeneration,
as applicable.
41
Loading ...
Loading ...
Loading ...