Innova SDS50 Sds Tech Oe-level Diagnostic Tablet

User Manual - Page 28

For SDS50.

PDF File Manual, 75 pages, Read Online | Download pdf file

SDS50 photo
Loading ...
Loading ...
Loading ...
OBD2 DIAGNOSTICS
Additional Testing Utilities
OBD Monitor Test - $06
The OBD Monitor Test - $06 retrieves and displays test results for emission-related powertrain components and
systems that are not continuously monitored. The tests available are determined by the vehicle manufacturer.
n If the vehicle under test does not support OBD Monitor Test, a warning message displays
OBD Monitor Test is not supported.
NOTE: The tablet does not perform the OBD mode test. Instead, it retrieves results
from the most recently performed tests from the on-board computer’s memory.
1. From the OBD Mode Test screen, tap OBD Monitor Test - $06.
2. When test results have been retrieved, the test results screen displays. The following information is provided
for each available test:
n Description
n Module No.
n Test Value
n Min or Max test limit
NOTE: Only one test limit, either Min or Max, is
shown for any given test.
n Unit
n Status
NOTE: Status is calculated by the tablet by comparing the test Value against the
displayed test limit (either Min or Max). Status is shown as either Low, High, or OK.
3. Tap the
Back icon to return to the OBD Mode Test screen or tap the Home icon to back to the Home
Screen.
Request Control On-Board System - $08
The Request Control On-Board System - $08 allows you perform EVAP Test or Particulate Filter Regeneration and
Inducement System Reinitialization.
n EVAP Test - lets you initiate a fuel vapor leak test for the vehicle’s EVAP system.
n Particulate Filter (PF) Regeneration – this service requests the vehicle to initiate a PF
regeneration. The vehicle manufacturer is responsible to determine the criteria to enable, start
and stop the test, such as engine running, vehicle speed, or engine RPM.
n Inducement System Reinitialization - This service requests the vehicle to initiate a reinitialize
the inducement system. The vehicle manufacturer is responsible to determine the criteria to
enable, start and stop the test, such as engine running, vehicle speed, or engine rpm.
21
Loading ...
Loading ...
Loading ...