Loading ...
Loading ...
Loading ...
40
WORKSHOP TOOLS
Steering Angle Sensor (SAS) Calibration
1. Tap EPB Reset in the Workshop Tools screen.
n A “One moment please…” message displays.
n For some vehicles, one or more sub-menus display. Choose the desired module and/or option,
as appropriate. Proceed to step 2.
NOTE: If EPB reset is not supported by the vehicle under test, an “advisory”
message displays. Tap OK to return to the Workshop Tools screen.
2. One or more “informational/instructional” screens display.
n Perform test procedures as directed. Tap Next, as appropriate, to scroll to the next screen.
3. For some vehicles, “status” screens display as each phase of the calibration procedure is successfully completed.
Tap Next, as appropriate, to scroll to the next screen.
n A “One moment please…” message displays while the procedure is in process.
n A “results” screen displays when the calibration procedure has completed.
NOTE: If the procedure is stopped due to a communication error, an “advisory”
message display. Tap Back to return to the Workshop Tools screen.
4. Tap Back to return to the Workshop Tools screen.
STEERING ANGLE SENSOR (SAS) CALIBRATION
The Steering Angle Sensor Calibration function is available for BMW, Chrysler, Ford, GM, Hyundai, Nissan, Toyota,
Volkswagen, and Volvo vehicles only. Calibration procedures vary between vehicle makes and models.
NOTE: If an error occurs while performing calibration procedures, an “advisory”
message display. Tap Exit to return to the Workshop Tools screen.
1. Tap Steering Angle Sensor Calibration in the Workshop Tools screen.
n For some vehicles, a sub-menu displays. Choose the desired option. Proceed to step 2.
NOTE: If SAS calibration is not supported by the vehicle under test, an “advisory”
message display. Tap OK to return to the Workshop Tools screen.
2. A “One moment please…” message displays, followed by one or more “informational/ instructional” screens.
n Perform test procedures as directed. Tap Next or Continue, as appropriate, to scroll to the next
screen. Or, tap End or Exit to terminate the procedure.
3. For some vehicles, “status” screens display as each phase of the calibration procedure is successfully completed.
Tap Next, as appropriate, to scroll to the next screen.
n A “results” screen displays when the calibration procedure has been completed.
4. Tap End or Exit, as appropriate, to return to the SAS Calibration menu.
5. Tap Back to return to the Workshop Tools screen.
Loading ...
Loading ...
Loading ...