Loading ...
Loading ...
Loading ...
GETTING STARTED
Scanning A Vehicle
3. Tap the Submit button.
n An error dialog will display if the VIN is unable to be decoded. Re-enter VIN.
n If you are still unable to decode the VIN, tap Select Vehicle (see steps below).
PROVIDING VEHICLE SELECTION INFORMATION
1. A dialog appears requesting Vehicle Selection.
2. Tap on each of the available entries (Year, Make, Model, Trim, Body Code, Engine).
n A grayed-out selection means that an entry is not available or not necessary for this vehicle.
3. Make a selection under each option.
4. Tap Continue to save your selections and return to the Home screen.
5. Tap Cancel to exit without selecting and return to the Home screen.
SCANNING A VEHICLE
Never replace a part based only on the DTC denition. Each DTC has a set of
testing procedures, instructions and ow charts that must be followed to conrm
the location of the problem. Always refer to the vehicle’s service manual for
detailed testing instructions.
NOTE: Check your vehicle thoroughly before performing any test.
WARNING: ALWAYS observe safety precautions whenever
working on a vehicle.
Refer to the appropriate diagnostic test you wish to perform:
OBD2 Diagnostics – [See page 12]
OEM Diagnostics – [See page 27]
Workshop Tools – [See page 37]
11
Loading ...
Loading ...
Loading ...