Loading ...
Loading ...
Loading ...
OEM DIAGNOSTICS
Viewing & Scanning An Individual Control Module
ERASING DTCs FOR A SELECTED MODULE
1. Tap the module for which you wish to Erase DTCs.
2. Tap Erase DTCs. A conrmation message shows.
n With the vehicle stopped, place the transmission in Park or in Neutral.
n If you are sure you want to proceed, tap Erase DTCs.
n If you do not want to proceed, tap Cancel to stop the erase procedure.
3. If you chose to Erase DTCs, a “One moment please…” message displays while the erase function is in progress.
n If the erase was successful, a conrmation message shows. Tap Scan Again to re-scan the
currently selected module.
n If the erase was not successful, an advisory message displays. Make sure the tablet is properly
connected to the vehicle’s DLC, then tap Try Again to repeat the erase procedure.
━ Tap Cancel to cancel the erase procedure and close the message.
VIEWING LIVE DATA FOR A SELECTED MODULE
1. While linked to the vehicle, start the engine.
2. Tap the module you wish to view its Live Data.
3. Tap the Live Data button to place the tablet in Live Data mode.
4. The results screen displays all of the vehicle’s available
PIDs with reported values. Each PID is unselected to
offer customization on which component you wish to
select and explore further. A total PID count is provided
at the top left of the screen.
5. Select the PIDs you wish to explore further and continue
as desired.
6. Refer to OBD2 Live Data on how to use the Live Data
mode [
See page 22].
PERFORMING ACTIVE TEST FOR ECM/PCM, TCM SYSTEMS
Active Tests enables you perform active tests for ECM/PCM, TCM systems on various vehicles. It offers the most
31
Loading ...
Loading ...
Loading ...