Loading ...
Loading ...
Loading ...
OEM DIAGNOSTICS
Scan All Systems
━ Verify the connection at the DLC, and verify the ignition is ON.
━ Turn the ignition OFF, wait 5 seconds, then back ON to reset the computer.
━ Tap Try Again to try again; or tap Cancel to return to the OEM Diagnostics menu.
3. The Scan All Systems screen displays the diagnostic test results.
VIEWING THE “SCAN ALL SYSTEMS” TEST RESULTS
Each report begins with a vehicle information bar that includes the vehicle’s description (year/make/model), the
Vehicle Identication Number (VIN) and the odometer reading (ODO) at the time the scan was performed.
The results window lists all tested Control Modules with its corresponding result:
n # Fault – Indicates the number of reported DTCs.
n No Fault – Indicates that no DTCs were found.
n Available – Indicates that the module is part of the
system but does not report DTCs.
The results screen also allows to either:
n Erase All DTCs – Erases all the vehicle’s retrieved
Diagnostic Trouble Codes (DTC).
n Rescan All Systems - Performs to scan all systems again.
ERASE ALL OEM DTCs
Erase all the stored OEM DTCs from the vehicle’s computer memory as follows:
From the Scan All Systems test results screen:
1. If the tablet is already connected and linked to the vehicle’s computer, proceed directly to Step 2.
n Ensure that the ignition in the Key ON, Engine OFF position.
2. Tap the Erase All DTCs button at the top of the Scan All
Systems results page.
n With the vehicle stopped, place the transmission in
Park or in Neutral.
n To proceed, tap Erase DTCs.
n Or, choose Cancel to exit the erase procedure.
3. By selecting to Erase DTCs, a “One moment please…”
progress dialog displays during the erase process.
n If the erase was successful, a conrmation dialog displays.
n After 3 seconds, the tablet automatically re-scans the vehicle to conrm DTC deletion.
29
Loading ...
Loading ...
Loading ...