Loading ...
Loading ...
Loading ...
8-5
08
WARNING
ś When connecting the supplementary
battery and the discharged battery
with a jump cable because the jump
start does not operate with jump start
terminal in the motor compartment,
do not directly connect the (-) to the
jump cable. Connect the (-) to the one
of the metallic parts located far from
the jump cable in the vehicle. The
direct (-) connection to the jumpcable
may cause an explosion.
ś The battery contains dilute sulfuric
acid, which is highly corrosive. Be
careful not to let the battery liquid get
on your body, clothes, or car body. If
dilute sulfuric acid gets on your body
or eyes, immediately rinse the area
with clean water for about 15 minutes
and then consult a doctor.
Jump starting procedure
Information
Your vehicle has a battery in the cargo
area, but when you jump start your
vehicle, use the jumper terminal in the
motor compartment.
1. Position the vehicles close enough
that the jumper cables will reach. Do
not allow the vehicles to touch.
2. Avoid fans or any moving parts in the
motor compartment at all times, even
when the vehicles are turned off.
3. Turn off all electrical devices such as
radios, lights, air conditioning, etc. Put
the vehicles in P (Park) and apply the
parking brake. Turn both vehicles OFF.
4. Open the hood.
OJKEV081003
5. Remove the motor compartment fuse
box cover.
CAUTION
Before jump starting, make sure to
correctly identify the positive (+) and
negative (-) terminals to avoid reverse
polarity connections.
Loading ...
Loading ...
Loading ...