Loading ...
Loading ...
Loading ...
1-20
Introduction / Starting Your Electric Vehicle
Precautions for handling and using
the V2L connector
CAUTION
ś Do not modify or disassemble the
V2L connector. It may cause fire,
electric shock, or injury. Damage to
your vehicle caused by modification
and disassembling is not covered by
warranty.
ś
OJKEVQ011023
Be careful when connecting or
disconnecting the power plug to the
V2L connector or when opening or
closing the V2L connector cover. You
may scratch your hand.
ś Do not place objects on the V2L
connector. It may damage the cable
and cause electric shock or fire.
ś Do not drop the V2L connector or
apply any impact on it. Keep it clean in
a dry place without water or humidity.
NOTICE
ś Be sure to disconnect the V2L
connector from the vehicle when you
are finished using the V2L function.
ś Do not charge the vehicle using the
V2L connector. If you charge the
vehicle by modifying the power cable
of the connector, etc., it may damage
the vehicle
Precautions when using electric/
electronic products
CAUTION
ś Before using the product, check
the precautions and how to use the
product referring to the product
manual.
ś Only use products that have obtained
national safety certification.
ś Only use an electric device that does
not exceed the maximum power
capacity that the vehicle can supply.
However, some of the electric devices
may not operate normally even if the
product has power consumption less
than the maximum power capacity
provided by the vehicle.
- Electric devices that require high
power during initial operation.
- Measuring devices that need to
process accurate data.
- Electric devices that are sensitive to
inverter type AC charger.
ś Do not use products that require a
continuous power supply, such as
medical equipment. The power supply
may be interrupted depending on the
vehicle’s condition.
ś The V2L discharging mode is
blocked automatically in case of
overheating. When the discharging
mode is blocked, check whether
the V2L connector or power plug is
contaminated, worn, corroded or
broken.
- If the temperature falls to a proper
level after it is left unattended, you
can use it again.
- If overheating repeats when using
a certain electric device, do not use
the electric device.
Loading ...
Loading ...
Loading ...