Loading ...
Loading ...
Loading ...
6-31
06
Information
During emergency braking, the Parking
Brake warning light will illuminate to
indicate that the system is operating.
NOTICE
If you continuously notice a noise or
burning smell when the EPB is used for
emergency braking, have the system
inspected by an authorized retailer of
Genesis Branded products.
Releasing the parking brake
OJKEV061024
To release EPB (Electronic Parking
Brake):
1. Press the Start/Stop button to the ON
or START position.
2. Press the EPB switch while depressing
the brake pedal.
Make sure the Parking Brake warning
light goes off.
To release EPB (Electronic Parking Brake)
automatically:
ś Gear in P (P
ark
)
With the vehicle on (
indicator
on), depress the brake pedal and shift
out of P (Park) to R (Reverse) or D
(Drive).
ś Gear in N (Neutral)
With the vehicle on (
indicator
on), depress the brake pedal and shift
out of N (Neutral) to R (Reverse) or D
(Drive).
ś Satisfy the following conditions
1. Ensure seat belts are fastened and
the doors, hood and liftgate are
closed.
2. With the vehicle on (
indicator on), depress the brake
pedal and shift out of P (Park) to R
(Reverse), D (Drive).
3. Depress the accelerator pedal.
Make sure the Parking Brake
warning light goes off.
Information
ś You can engage EPB even though
the Stop/Start button is in the OFF
position (only if battery power is
available), but you cannot release it.
ś Depress the brake pedal and release
the parking brake manually with the
EPB switch before you drive downhill
or when backing up.
NOTICE
ś If the Parking Brake warning light is
still on even though the EPB has been
released, have the system checked
by an authorized retailer of Genesis
Branded products.
ś Do not drive your vehicle with EPB
applied. It may cause excessive brake
pad and brake rotor wear.
Loading ...
Loading ...
Loading ...