Loading ...
Loading ...
Loading ...
3-33
03
NOTICE
The sensor that activates the SRS
control module is connected with the
pre-tensioner seat belts. The SRS airbag
warning light on the instrument cluster
will illuminate for about 3-6 seconds
after the Start/Stop button is in the ON
position, and then it should turn off.
If the pre-tensioner is not working
properly, the warning light will
illuminate even if the SRS airbag is not
malfunctioning. If the warning light
does not illuminate, stays illuminated
or illuminates when the vehicle is being
driven, have the pre-tensioner seat belts
and/or SRS control module inspected by
an authorized retailer of Genesis Branded
products as soon as possible.
Information
ś Pre-tensioner seat belts may activate
in certain frontal or side collisions or
rollover situations.
ś When the pre-tensioner seat belts are
activated, a loud noise may be heard
and fine dust, which may appear
to be smoke, may be visible in the
passenger compartment. These are
normal operating conditions and are
not hazardous.
ś Although it is non-toxic, the fine
dust may cause skin irritation and
should not be inhaled for prolonged
periods. Wash all exposed skin areas
thoroughly after an accident in which
the pre-tensioner seat belts were
activated.
WARNING
ś Fasten your seat belt while sitting
properly in an upright position to
maximize the effectiveness of the pre-
tensioner seat belt system.
ś A pre-tensioner seat belt system
is designed to activate only once.
Replace the pre-tensioner seat belt
system, if it was activated in an
accident.
Loading ...
Loading ...
Loading ...