Loading ...
Loading ...
Loading ...
Problem solving guide
69
Problem Cause and remedy
Liquid has got into the
vapour extraction.
Due to boiling over or spillage, liquid has made its
way through the cover grille into the vapour extrac-
tion.
The base of the grease filter and the drip tray can
hold approx. 800ml of liquid in total.
Switch the vapour extraction off.
Clean the grease filter, the drip tray, the inside of
the casing and the fan motor compartment (see
“Cleaning and care”).
KMDA 7473 FR-U, KMDA 7473 FL-U only: replace
the charcoal filter (see “Cleaning and care – Repla-
cing the charcoal filter”).
Extraction power has
decreased. Extraction
noise has increased.
Objects (e.g. a cloth) have been drawn into the va-
pour extraction.
Switch the vapour extraction off.
Remove the grease filter (see “Cleaning and care –
Cleaning the grease filter”).
Remove any objects from the grease filter.
The sensor control is
lit up.
The charcoal filter must be replaced.
Replace the charcoal filter (see “Cleaning and care
– Replacing the charcoal filter”).
Reset the operating hours counter (see “Cleaning
and care – Resetting the charcoal filter operating
hours counter”).
The sensor control is
lit up.
The grease filter must be cleaned.
Clean the grease filter as described in “Cleaning
and care – Cleaning the grease filter”.
The sensor control
does not light up.
The Con@ctivity function of the integrated vapour ex-
traction is permanently deactivated.
Activate the Con@ctivity function of the integrated
vapour extraction in the programming (see “Pro-
gramming”).
Loading ...
Loading ...
Loading ...