Loading ...
Loading ...
Loading ...
Operation
44
Vapour extraction
The vapour extraction will switch itself
on automatically if there is an item of
cookware on a cooking zone and a
power level has been set for that zone
(Con@ctivity). The power level for va-
pour extraction is set to suit the power
level of the cooking zone. The run-on
time and level depend on the power
level of the vapour extraction.
You can deactivate Con@ctivity tempor-
arily or permanently. To deactivate
Con@ctivity permanently, see “Pro-
gramming”. If Con@ctivity is perman-
ently deactivated, the sensor control
will no longer be illuminated.
The power level of the vapour extraction
can be manually altered at any time.
Power levels 1 to 3 and a Booster level
are set as standard. The power levels
can be extended to 1 to 9 and a
Booster level, see “Programming”.
For light to heavy cooking vapours and
odours, select from power levels 1 to 3
(9 with the extended power levels). For
short periods of very strong vapours
and odours, e.g. whilst searing meat,
select the B Booster setting.
If the vapour extraction starts with
power level1, the power is automatic-
ally increased to level2 for
20seconds. The increase in power is
necessary in order to ensure that the
flap opens in extraction mode. If you
are using the vapour extraction in re-
circulation mode, you can deactivate
this automatic function, see “Program-
ming”.
Tip: To help release vapours effectively
with pans over 15cm high, place a
wooden spoon between the lid and the
pan.
Loading ...
Loading ...
Loading ...