Loading ...
Loading ...
Loading ...
Programming
57
Programme1Code2Settings
P:17 Vapour extraction operating
mode C:009Recirculation mode
C:019Extraction mode
P:18 Start settings of Con@ctivity10 C:00 Always start with Con@ctivity deac-
tivated
C:01 Always start with Con@ctivity activ-
ated
C:02 Start with the most recently set
Con@ctivity state
P:19 Number of vapour extraction
power levels
C:00 3 power levels + Booster
C:01 9 power levels + Booster
1Programmes not shown here have no allocation.
2The factory default setting is shown in bold.
3After the hob has been switched on, appears in the timer display for a few seconds.
4The total output of the hob may be reduced in order to meet the local network provider’s
requirements.
5The settings for the P:17 operating mode of the vapour extraction will not be reset to the
factory default settings.
6In the text and tables, the extended power levels are shown with a dot after the number.
7The confirmation tone of the On/Offsensor control cannot be switched off.
8 Plug&Play mode: Con@ctivity is required for correct operation.
9Factory-set code:
KMDA 7473 FR-U, KMDA 7473 FL-U: C:00
KMDA 7473 FR-A, KMDA 7473 FL-A: C:01
10The settings only take effect if Con@ctivity has been activated in the P:16 programme.
Loading ...
Loading ...
Loading ...