Loading ...
Loading ...
Loading ...
Programming
54
You can adapt the programming of the
hob to your personal needs. Several
settings can be altered in succession.
After accessing programming mode,
the + sensor and will appear in the
timer display. After a few seconds :
(Programme 01) will flash alternately
with : (Code) in the timer display.
Changing the programming
Accessing programming mode
With the hob switched off, touch
and hold the and sensors to-
gether until the + sensor lights up and
appears in the timer display.
Setting the programme
For a two-digit programme number
you need to first set the tens position.
Whilst the programme is visible in the
display (e.g. :), touch the +sensor
repeatedly until the number for the
programme you want appears in the
display or touch the appropriate num-
ber on the numerical display.
Setting the code
Whilst the code is visible in the dis-
play (e.g. :), touch the+sensor re-
peatedly until the number for the
code you want appears in the display
or touch the appropriate number on
the numerical display.
Saving the settings
Whilst the programme is visible in the
display (e.g.:), touch the
sensor until the indicators go out.
To avoid saving the settings
While the code is showing in the dis-
play (e.g. :) touch the sensor
until the indicators go out.
Loading ...
Loading ...
Loading ...