Loading ...
Loading ...
Loading ...
SDG1000 User Manual 68
Figure 2- 60 Set the Output Load
Instruction
SDG1000 Series has a fixed 50Ω Series Impendence. No matter what value
the set parameter is, if the real load is different from the set one, the displayed
voltage will not equal the real voltage.
2. To Set the Invert Waveform
Press Utility →Output Setup→ Invert, to set the Inverse Waveform Output.
When the waveform is inverse, no offset will change.
3. To Set the Coupling
SDG1000 supports frequency and phase couplings. When coplings is
enabled, CH1 and CH2 are mutual base source. When the frequency or
phase of one channel (as the base source) is changed, the corresponding
parameter of the other channel will be changed automatically and always
keeps the specified frequency deviation or phase deviation relative to the
Loading ...
Loading ...
Loading ...