Loading ...
Loading ...
Loading ...
9
Getting to know your appliance en-us
Assembly and components
Loading ...
Loading ...
Loading ...
- CM470712
- Table of Contents
- Use and care manual
- 9 Safety Definitions 3
- IMPORTANT SAFETY PRECAUTIONS 4
- 7 Environmental protection 7
- Getting to know your appliance 8
- Switching the appliance on and off 12
- Setting up the appliance 13
- Water filter 14
- Filling the bean container 15
- Preparing beverages 16
- Individual beverages 21
- Child lock 22
- General settings 23
- o Home Connect 26
- Daily care and cleaning 30
- Service programs 33
- Emptying program 35
- AQUA-STOP pledge 36
- Technical specifications 36
- Simple troubleshooting 37
- How to use these instructions
- 9 Safety Definitions
- IMPORTANT SAFETY PRECAUTIONS
- READ AND SAVE THESE INSTRUCTIONS
- 1. Please read and follow the operating instructions carefully and keep them for later reference. If the unit is transferred to another party, please be sure to include these instructions.
- 2. Check the appliance after unpacking it. Do not connect the appliance if it has been damaged in transit.
- 3. Do not touch hot surfaces. Use handles or knobs.
- 4. Be sure that all components are assembled and fastened properly.
- 5. To protect against fire, electric shock and injury to persons, do not immerse cord, plugs, or body in water or in any other liquid. See Use and Care Guide for cleaning.
- 6. Close supervision is necessary when the appliance is used by or near children.
- 7. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- 8. Do not operate any appliance with a damaged cord or plug or after it malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility.
- 9. The use of accessories attachments not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons.
- 10. Do not use outdoors or in a damp area.
- 11. Do not let cord hang over edge of table or countertop, or touch hot surfaces.
- 12. Do not place unit or components on or near a cooktop or range, or in a heated oven.
- 13. This appliance must not be used by children without adult supervision or by disabled persons without assistance.
- 14. If water is leaking from the inlet hose, turn off the tap at once. When connecting or working on the water pipe, disconnect the appliance from the mains power supply.
- 15. Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn control to “off”, then remove plug from wall outlet.
- 16. Do not use appliance for anything other than its intended use.
- 17. Save these instructions.
- 18. Please note the special information on cleaning in the instructions.
- 9 WARNING
- 9 WARNING
- Proposition 65 Warning:
- 7 Environmental protection
- Getting to know your appliance
- READ AND SAVE THESE INSTRUCTIONS
- The appliance is equipped with the following accessories as standard:
- The following accessories can be reordered by contacting our customer service:
- Switching the appliance on and off
- Setting up the appliance
- Setting up the appliance
- Note:
- Initial settings
- Notes
- 1. Switch on the appliance at the main switch.
- 2. Use the rotary selector to select the required display language.
- 3. Press ™ to confirm.
- 4. Use the rotary selector to select the required temperature unit.
- 5. Press ™ to confirm.
- 6. Use the rotary selector to select the required capacity unit.
- 7. Press ™ to confirm.
- 8. Use the rotary selector to select the required weight unit.
- 9. Press ™ to confirm.
- Note:
- Notes
- Setting water hardness
- 1. Briefly immerse the enclosed test strip in fresh tap water, leave it to drip off and read off the result after one minute.
- 2. Rotate function selector to S.
- 3. Use the rotary selector to select "General settings" and touch the ™ symbol.
- 4. Use the rotary selector to select "Water hardness".
- 5. Touch the % symbol.
- 6. Using the rotary selector, set the measured water hardness.
- 7. Press ™ to confirm.
- Level
- Water hardness
- g/gal (US)
- Water filter
- Water filter
- Operation with or without water filter
- 1. Rotate function selector to S.
- 2. Select "General settings" using the rotary selector.
- 3. Touch the ™ symbol.
- 4. Select "Water filter" using the rotary selector.
- 5. Touch the % symbol.
- 6. Use the rotary selector to select either "Available" (with water filter) or "Not available" (without water filter).
- 7. Press ™ to confirm.
- 8. Touch the ' symbol to exit the general settings menu.
- Inserting the water filter
- Filling the bean container
- Preparing beverages
- Preparing beverages
- Beverage selection
- Aroma function "Extra strong"
- Preparing coffee using freshly ground beans
- 1. Rotate function selector to position 2.
- 2. Use the rotary selector to select the desired beverage, e.g. coffee.
- 3. Place a cup under the beverage dispenser.
- 4. Touch the C symbol.
- 5. Set the size using the rotary selector.
- 6. Touch the C symbol.
- 7. Set the strength using the rotary selector.
- 8. Touch the C symbol.
- 9. Set the temperature using the rotary selector.
- 10. Press ™ to confirm the settings.
- 11. Start with I.
- Notes
- Preparing two cups at the same time
- Preparing coffee using ground coffee
- 1. Rotate function selector to position 2.
- 2. Open the door.
- 3. Using the measuring spoon, fill a maximum of two level spoonfuls of ground coffee into the ground coffee drawer. Close the ground coffee drawer.
- Note:
- 4. Close the door.
- 5. Use the rotary selector to select the desired beverage (beverages made from ground coffee are identified with the x symbol).
- 6. Place a cup under the beverage dispenser.
- 7. Touch the C symbol.
- 8. Set the size using the rotary selector.
- 9. Touch the C symbol.
- 10. Set the temperature using the rotary selector.
- 11. Press ™ to confirm the settings.
- 12. Start with I.
- Notes
- Preparing coffee with milk
- Preparing coffee using freshly ground beans
- Using the milk container:
- Using a milk carton or other container:
- 1. Rotate function selector to position 2.
- 2. Using the rotary selector, select a coffee beverage with milk. To select a beverage made using ground coffee, you must first fill the ground coffee drawer.
- 3. Place a cup or glass under the beverage dispenser.
- 4. Start with I.
- Notes
- Preparing milk froth and warm milk
- 9 WARNING
- Risk of burns!
- 1. Rotate function selector to position 2.
- 2. Connect the milk hose. ~ "Preparing coffee with milk" on page 18
- 3. Select "Milk froth" or "Warm milk" with the rotary selector.
- 4. Place a cup or glass under the beverage dispenser.
- 5. Touch the C symbol.
- 6. Set the size using the rotary selector.
- 7. Press ™ to confirm the settings.
- 8. Start with I.
- Notes
- Risk of burns!
- 9 WARNING
- Preparing hot water
- 9 WARNING
- Risk of burns!
- 1. Remove the milk tube from the milk container.
- 2. Rotate function selector to position 2.
- 3. Select "Hot water" with the rotary selector.
- 4. Place a cup or glass under the beverage dispenser.
- 5. Touch the C symbol.
- 6. Set the size using the rotary selector.
- 7. Touch the C symbol.
- 8. Set the temperature using the rotary selector.
- 9. Press ™ to confirm.
- 10. Start with I.
- Notes
- Risk of burns!
- 9 WARNING
- Setting the grinding level
- Changing bean type
- Individual beverages
- Individual beverages
- 1. Turn the function selector to one of the 8 memory locations.
- 2. Use the C symbol to select the desired beverage, capacity, strength, temperature and coffee-milk ratio and use the rotary selector to save the settings.
- 3. Enter the name of the beverage in "ABC".
- 4. Save with ™ or cancel and exit the menu with '.
- 5. Start with I.
- Notes
- Individual beverages
- Child lock
- General settings
- General settings
- 1. Set the program selector to S.
- 2. Select "General setting" with the rotary selector.
- 3. Touch the ™ symbol.
- 4. Set the required general setting with the rotary selector.
- 5. Touch the % symbol.
- 6. Set the general setting with the rotary selector.
- 7. Save with ™ or cancel with ' and quit the current general setting.
- 8. Turn the program selector to 0 to quit the general setting menu.
- Note:
- Note:
- --------
- Setting the milk container weight
- Note:
- 1. Rotate function selector to S.
- 2. Select "General settings" using the rotary selector.
- 3. Touch the ™ symbol.
- 4. Select "Milk container weight" with the rotary selector.
- 5. Touch the % symbol.
- 6. Select "Standard" (preset milk container weight) or "Individual" (own weight entry for the milk container) using the rotary selector.
- 7. Press ™ to confirm.
- 8. For the "Standard" setting, the appliance automatically reverts to the selection layer of the "General settings" or For the "Individual" setting, an individual milk container can now also be weighed and the weight saved.
- 9. Check whether the area for the milk container behind the door is free, confirm with ™.
- 10. Place an empty container, e.g. a milk jug, into the area, confirm with ™.
- 11. Close the door.
- 12. Press ™ to confirm.
- 13. Touch the ' symbol to leave the "General settings" menu.
- Note:
- Messages
- o Home Connect
- Home Connect
- Notes
- Setting Up
- Installing the app
- Connecting the appliance to your home network (LAN)
- Connecting the appliance to your home network (WLAN with WPS)
- 1. In the basic settings, select ¯ "Home Connect".
- 2. Touch the % symbol.
- 3. Turn the rotary selector to "WLAN".
- 4. Confirm by touching the ™ symbol.
- 5. Touch the ™ symbol to continue.
- 6. Turn the rotary selector to "Automatic (WPS)".
- 7. Touch the ™ symbol to start the connection process.
- 8. Press the WPS button on the home network router within the next 2 minutes.
- 9. Touch the ™ symbol to continue.
- 10. Touch the % symbol.
- 11. Touch the ™ symbol to confirm.
- Connecting the appliance to your home network (WLAN without WPS)
- 1. In the basic settings, select ¯ "Home Connect".
- 2. Touch the % symbol.
- 3. Turn the rotary selector to "Wi-Fi".
- 4. Confirm by touching the ™ symbol.
- 5. Touch the ™ symbol to continue.
- 6. Turn the rotary selector to "Manual".
- 7. Touch the ™ symbol to start the connection process.
- 8. Follow the instructions in the app.
- 9. Touch the ™ symbol to continue.
- 10. Touch the % symbol.
- 11. Touch the ™ symbol to confirm.
- General settings
- Home Connect settings
- Note:
- --------
- Remote Start
- Remote Diagnostics
- Information on Data Protection
- Declaration of Conformity
- Wi-Fi® Module
- FCC COMPLIANCE STATEMENT
- INDUSTRY CANADA STATEMENT
- Daily care and cleaning
- Daily care and cleaning
- Daily care
- 9 WARNING
- Risk of electric shock!
- 9 CAUTION
- Notes
- 1. Wipe the housing with a soft, damp cloth.
- 2. Remove the shelf, open the door and pull out the drip tray to the front.
- 3. Press down the lever in the drip tray and pull out the drip tray forwards.
- 4. Remove the filter from the drip tray.
- 5. Empty, clean and dry individual parts.
- 6. Rinse out the water tank with clear, fresh water.
- 7. Remove the ground coffee drawer, clean it under running water and dry it thoroughly.
- 8. Wipe out the inside of the appliance (drip tray holder and ground coffee drawer) and the collecting tray and dry them.
- 9. Insert the filter in the drip tray and snap into place.
- 10. Insert the dry parts, such as the ground coffee drawer.
- Notes
- 9 CAUTION
- 9 WARNING
- Cleaning the milk system
- Cleaning the milk system automatically
- 1. Rotate function selector to S.
- 2. Use the rotary selector to select "Clean milk frothing system".
- 3. Touch the ™ symbol.
- 4. Open the door.
- 5. Remove the milk tube from the milk container, wipe it down and insert the end of the milk tube into the hole on the coffee residue container.
- 6. Close the door.
- 7. Touch the I symbol.
- 8. Touch the ™ symbol.
- Cleaning the milk system manually
- 1. Push the beverage dispenser down completely and pull the cover forward to remove.
- 2. Press the snap lever to the left of the beverage dispenser downwards and pull the beverage dispenser straight forwards.
- 3. Detach the milk hose, dismantle the top and bottom sections of the beverage dispenser.
- 4. Separate the milk hoses, connecting element and milk tube.
- 5. Clean the individual parts with a detergent solution and a soft cloth.
- 6. Rinse all parts with clean water and dry.
- 7. Put the individual parts back together again (see also quick reference guide).
- 8. Firmly attach the beverage dispenser from the front to the three connections.
- 9. Replace the cover.
- Cleaning the milk container
- Cleaning the brewing unit
- Notes
- 1. Rotate function selector to 0.
- 2. Open the door.
- 3. Switch off the appliance using the main switch.
- 4. Remove the protective cover of the brewing unit.
- 5. Remove the coffee residue container.
- 6. Slide the red latch on the brewing unit all the way to the left to ô.
- 7. Press the eject lever right down.
- 8. Take hold of the brewing unit by the recessed grips and carefully remove it.
- 9. Clean the brewing unit thoroughly under running water.
- 10. Remove the cover and clean the filter under running water.
- 11. Thoroughly clean the connecting taps on the brewing unit.
- 12. Clean the interior of the appliance thoroughly, taking care to remove any coffee residues.
- 13. Allow the brewing unit and the interior of the appliance to dry.
- 14. Refit the cover.
- 15. Push the brewing unit all the way into the appliance and press on the middle until it audibly clicks into place.
- 16. Press the eject lever all the way up and push the red latch right over to the right to ó.
- 17. Insert the coffee residue container.
- 18. Replace the protective cover.
- 19. Close the door.
- Notes
- Cleaning the brewing unit
- Service programs
- Duration: approx. 5 minutes
- 1. Rotate function selector to S.
- 2. Select "Cleaning program" using the rotary selector.
- 3. Touch the ™ symbol.
- 4. Empty the drip tray with the filter and the coffee residue container. Clean and reinsert.
- 5. Place a cleaning tablet into the ground coffee drawer and close the drawer again.
- 6. Close the door.
- 7. Touch the I symbol.
- 8. Touch the ™ symbol.
- Descaling
- 1. Rotate function selector to S.
- 2. Select "Descaling program" using the rotary selector.
- 3. Touch the ™ symbol.
- 4. Empty the drip tray with the filter and the coffee residue container. Clean and reinsert.
- 5. Remove the water filter (if there is one) and touch the ™ symbol.
- 6. Pour lukewarm water into the empty water tank up to the "calc" mark (17 oz/0.5 l) and then dissolve a descaling tablet in it.
- 7. Remove the milk tube from the milk container, wipe it down and insert the end of the milk tube into the hole on the coffee residue container.
- 8. Close the door.
- 9. Touch the I symbol.
- Note:
- Cleaning and descaling
- 1. Rotate function selector to S.
- 2. Select "Cleaning and descaling program" using the rotary selector.
- 3. Touch the ™ symbol.
- 4. Empty the drip tray with the filter and the coffee residue container. Clean and reinsert.
- 5. Place a cleaning tablet into the ground coffee drawer and close the drawer again.
- 6. Remove the water filter (if there is one) and touch the ™ symbol.
- 7. Pour lukewarm water into the empty water tank up to the "calc" mark (17 oz/0.5 l) and then dissolve a descaling tablet in it.
- 8. Remove the milk tube from the milk container, wipe it down and insert the end of the milk tube into the hole on the coffee residue container.
- 9. Close the door.
- 10. Touch the I symbol.
- Note:
- Fill the water tank with fresh water
- Emptying program
- Emptying program
- 1. Rotate function selector to S.
- 2. Select "Emptying program" with the rotary selector.
- 3. Touch the ™ symbol.
- 4. Empty the bean container and reinsert it.
- 5. If present, remove the milk container.
- 6. Close the door.
- 7. Remove the brewing unit and clean it thoroughly.
- 8. Clean the drip tray, coffee residue container, milk system and milk hose set thoroughly, then reinsert them.
- 9. Close the door.
- 10. Touch the ™ symbol.
- Emptying program
- AQUA-STOP pledge
- 1. If water damage is caused by defect in materials or workmanship in the Aqua-Stop system, BSH will compensate customers reasonable and verifiable damages.
- 2. A condition of all warranty claims is the appliance with Aqua-Stop must have been installed and connected correctly in accordance with all instructions; this also includes a properly installed Aqua-Stop extension (genuine accessories). The warrant...
- Technical specifications
- Simple troubleshooting
- Use and care manual