Loading ...
Loading ...
Loading ...
20
en-us Preparing beverages
Preparing hot water
9 WARNING
Risk of burns!
The milk system becomes very hot. After use,
always let it cool down before you touch it.
The appliance must be switched on.
1. Remove the milk tube from the milk container.
2. Rotate function selector to position 2.
3. Select "Hot water" with the rotary selector.
4. Place a cup or glass under the beverage dispenser.
5. Touch the C symbol.
6. Set the size using the rotary selector.
7. Touch the C symbol.
8. Set the temperature using the rotary selector.
9. Press ™ to confirm.
10. Start with I.
The water is heated and then flows into the cup or glass.
Notes
▯ While the beverage is dispensed, the & symbol is
displayed. Touch this symbol to stop the beverage
being prepared.
▯ Using the ‡ symbol, you can save the current
beverage: Touch the ‡ symbol, turn the function
selector to a free memory location and save the entry.
~ "Individual beverages" on page 21
Setting the grinding level
9 WARNING
Risk of injury!
Do not reach into the grinding unit.
Using the slider for the grinding level, the desired
fineness of the ground coffee can be set between a fine
grinding level (left) and a coarser grinding level (right).
Notes
▯ The effects of the new grinding setting will only
become apparent after the second cup of coffee.
▯ For dark roast coffee beans, choose a finer grinding
level; for lighter beans, choose a coarser grinding
level.
▯ If the display shows the message "Set coarser
grinding level", the coffee beans are being ground too
finely. Set a coarser grinding level; to do so, slide the
slider to the right.
▯ Only make small changes to the grinding level setting.
Changing bean type
If you are using a new type of bean, the Empty grind
function allows you to run the grinding unit until empty of
your previous bean type.
The appliance must be switched on.
1. Remove the bean container and empty out the beans.
2. Add the new beans and reinsert the bean container.
The message "New type of coffee beans in bean
container?" appears.
3. Press ™ to confirm.
The grinding unit is then emptied of your previous bean
type in two grinding stages.
Note: This message always appears when the bean
container is inserted. If you do not want to empty the
grinding unit, e.g. when only refilling with beans, confirm
with '.
Loading ...
Loading ...
Loading ...