Loading ...
Loading ...
Loading ...
14
en-us Water filter
Setting water hardness
It is important to set the water hardness correctly, so that
the appliance indicates accurately when the descaling
program should be run. The preset water hardness is
level 4. If a water softening unit is installed in the
household, select the "Water softening unit" setting. You
can check the water hardness using the enclosed test
strip or by asking your local water supplier.
1. Briefly immerse the enclosed test strip in fresh tap
water, leave it to drip off and read off the result after
one minute.
2. Rotate function selector to S.
3. Use the rotary selector to select "General settings"
and touch the ™ symbol.
4. Use the rotary selector to select "Water hardness".
5. Touch the % symbol.
6. Using the rotary selector, set the measured water
hardness.
7. Press ™ to confirm.
The setting is saved. Touch ' in order to exit the general
settings.
The table shows the allocation of the levels to the
different degrees of water hardness:
Water filter
Water filter
Operation with or without water filter
You can use the appliance with or without a water filter.
To ensure that the descaling display of the appliance
functions correctly, you must state in the general settings
whether a water filter is used.
1. Rotate function selector to S.
2. Select "General settings" using the rotary selector.
3. Touch the ™ symbol.
4. Select "Water filter" using the rotary selector.
5. Touch the % symbol.
6. Use the rotary selector to select either "Available"
(with water filter) or "Not available" (without water
filter).
7. Press ™ to confirm.
For the setting "Available", the rinse program starts.
Proceed according to the information on the display.
8. Touch the ' symbol to exit the general settings menu.
A water filter lessens limescale deposits and reduces
impurities in the water. The appliance also does not need
to be descaled so often.
Level Water hardness
g/gal (US)
1 1.0426- 7.2985
2 8.3412- 14.597
3 15.64- 21.896
4 22.938- 31.279
Loading ...
Loading ...
Loading ...