Gaggenau CM470712 User Manual

Loading ...

Preparing beverages en-us

Using a milk carton or other container:

▯ Open the door.

▯ Push the beverage dispenser down completely.

▯ Remove the cover of the beverage dispenser towards

the front.

▯ Feed the milk system's milk hose outward through the

opening at the top.

▯ Attach the magnetic holder to the appliance.

▯ Place the full milk carton on the right next to the

beverage dispenser. Connect the milk tube to the milk

hose and then guide the milk tube into the milk carton.

The end of the milk tube must be immersed in the

milk.

▯ Close the door.

To prepare a beverage:

The appliance must be switched on. The bean container

must be filled.

1. Rotate function selector to position 2.

2. Using the rotary selector, select a coffee beverage

with milk. To select a beverage made using ground

coffee, you must first fill the ground coffee drawer.

3. Place a cup or glass under the beverage dispenser.

4. Start with I.

- or -

Touch the C symbol first, then set the size or strength,

for example, using the rotary selector and confirm with

™.

The milk is drawn in and prepared, after which the coffee

is brewed.

Notes

▯ While the beverage is dispensed, the & symbol is

displayed. Touch this symbol to stop the beverage

being prepared.

▯ Using the ‡ symbol, you can save the current

beverage: Touch the ‡ symbol, turn the function

selector to a free memory location and save the entry.

~ "Individual beverages" on page 21

▯ Dried-on milk residues are difficult to remove, so

always clean the milk system after every use.

~ "Cleaning the milk system" on page 30

Preparing milk froth and warm milk

9 WARNING

Risk of burns!

The milk system becomes very hot. After use,

always let it cool down before you touch it.

To prepare a beverage:

The appliance must be switched on.

1. Rotate function selector to position 2.

2. Connect the milk hose. ~ "Preparing coffee with

milk" on page 18

3. Select "Milk froth" or "Warm milk" with the rotary

selector.

4. Place a cup or glass under the beverage dispenser.

5. Touch the C symbol.

6. Set the size using the rotary selector.

7. Press ™ to confirm the settings.

8. Start with I.

The milk is drawn in and subsequently flows into the cup

or the glass.