Gaggenau CM470712

User Manual - Page 33

For CM470712.

PDF File Manual, 40 pages, Download pdf file

Loading ...
Loading ...
Loading ...
33
Service programs en-us
Service programs
Service programs
(See also the quick reference guide)
Every so often – the exact frequency depends on usage
and water hardness – one of the following messages will
appear on the display in place of the coffee selection:
Please change water filter
Please clean
Please descale
Please clean and descale
Then the ) warning symbol lights up.
The water filter should be changed immediately at this
point and the appliance cleaned or descaled using the
appropriate program. Otherwise the appliance may be
damaged.
You can also start the service programs at any time
without having to wait for a reminder to appear on the
display. Set the function selector to S, and select and run
the desired program.
Notes
Caution! Do not drink or come into contact with
cleaning or descaling materials. Keep cleaning
materials and descaling tablets out of the reach of
children. They may be toxic.
Important: If the appliance is not descaled when it is
supposed to be, the message "Appliance locked
Descaling required urgently" will appear. Immediately
perform the descaling process in accordance with the
instructions. If the appliance is locked, it can only be
operated again once the descaling process has been
carried out.
Warning! For each of the service programs, use
descaling and cleaning agents as described in the
instructions and observe the (relevant) safety
information.
Do not drink the liquids.
Never use citric acid, vinegar or any vinegar- based
agents to descale the appliance.
For cleaning and descaling, only use the tablets
intended for this purpose. The tablets were specially
developed for this appliance and new stocks can be
ordered through our customer service.
~ "Accessories" on page 12
Never insert descaling tablets or other agents into the
grounds compartment.
Never interrupt the service program.
Prior to starting a service program, remove, clean and
reinsert the brewing unit. Rinse the milk system.
At the end of a service program, wipe down the
appliance using a soft, damp cloth to immediately
remove any residue of the descaling solution. This
residue may cause corrosion to form.
New sponge cloths may contain salts. Salts can cause
rust film on stainless steel and must therefore be
washed out thoroughly before use.
If one of the service programs is interrupted, e.g. by a
power outage, proceed as follows:
1. Touch the symbol.
2. Remove the milk tube from the milk container and
wipe it down. Insert the end of the milk tube into the
hole in the coffee residue container.
3. Touch the I symbol.
The programme starts and rinses the
appliance.Duration: approx. 2 minutes.
4. Touch the symbol.
Caution! Do not drink the descale solution.
Using a water filter increases the intervals until a
descaling program needs to be performed.
Loading ...
Loading ...
Loading ...