Loading ...
Loading ...
Loading ...
4. Push the lever for the hydraulic lift arms forward to
lower the cutting deck to the ground.
5. Move the throttle control rearward to the low speed
position.
6. Turn the ignition key to the STOP position.
ON
7. At the end of operation, or when you do
maintenance on the product, turn the main switch to
the OFF position.
To apply and release the parking brake
1. To apply the parking brake, move the parking brake
lever fully forward.
2. To release the parking brake, move the parking
brake lever fully rearward.
To set the 12 V power outlet to on or off
• Push the power switch (A) on the right control panel
to set the power outlet (B) to on or off. The voltage
of the power outlet is 12 V. The power outlet has a
fuse, refer to
Fuse overview on page 38
.
A
B
Note: The AUX 12 V and the USB outlets are
always set to on.
To get a good cutting result
• For best performance, do maintenance on the
product regularly as given in the maintenance
schedule. Refer to .
• Do not cut a wet lawn. Wet grass can give a bad
cutting result.
• Start with a high cutting height and decrease it
gradually.
• Cut with blades that rotate at high speed (highest
permitted engine speed, refer to
Technical data on
page 58
). Move the product forward at low speed.
If the grass is not too high and thick, you can get a
good cutting result also at a higher speed.
• Cut the grass in an irregular pattern.
• To get the best cutting result, cut the grass
frequently and use the Bioclip
®
function.
26
1593 - 006 - 14.11.2022
Loading ...
Loading ...
Loading ...