Loading ...
Loading ...
Loading ...
20. Attach the straps in the lifting eyes of the cabin.
21. Carefully lift the cabin in the straps with a lift.
22. Lift the cabin 10 cm above the product.
CAUTION: Make sure that the cabin
is lifted above the bolts.
23. Carefully move the cabin forward.
24. Put the cabin in the cabin support. Refer to
Storage
of the cabin on page 56
WARNING: ROPS must be
installed when the cabin is removed.
Refer to
To engage and disengage the
Roll Over Protection Structure (ROPS)
on page 19
.
25. Install in the opposite sequence.
To remove and install the door
1. Open the door 90 degrees.
2. Pull out the gas spring and loosen the ball joint.
3. Lift the door to remove it.
4. Install in the opposite sequence.
To remove and install the emergency door
1. Open the lock handle on the emergency door.
2. Remove the hinge pin.
3. Open the door 90 degrees.
4. Lift the emergency door to remove it.
5. Install in the opposite sequence.
To engage and disengage the Roll
Over Protection Structure (ROPS)
• Remove the 2 bolts that hold the ROPS and fold it
rearwards to disengage. Engage the ROPS in the
opposite sequence.
WARNING: Obey the following
instructions for the ROPS and the seat
belt.
• Do not use the seat belt if the ROPS is disengaged.
• Always use the seat belt when the ROPS is
engaged.
• Make sure that the ROPS is correctly attached and
not damaged.
1593 - 006 - 14.11.2022
19
Loading ...
Loading ...
Loading ...