Loading ...
Loading ...
Loading ...
8. Put the rubber grommet in the empty slot.
9. Disconnect the 2 connectors from the headlight
switch.
10. Remove the cable bridge from the connector and
install the connector on the headlight switch.
11. Turn the headlight switch ON and OFF to make sure
the headlights work correctly.
12. Put a cloth below the hoses for the cabin heat.
Note:
To prevent coolant leakage, make sure
that the cabin heat is off before you disconnect the
hoses.
13. Disconnect the hoses for the cabin heat.
14. Remove the 2 screws and the 2 washers behind the
seat (A).
A
B
C
15. Remove the screw and the washer behind the hoses
for the cabin heat (B).
16. Remove the screw and the washer at the front of the
door (C).
17. Fold the seat forward.
18. Put 2 straps through the door and the emergency
exit.
19. Put the straps 2 turns through the cabin.
18
1593 - 006 - 14.11.2022
Loading ...
Loading ...
Loading ...