Loading ...
Loading ...
Loading ...
7. Pull the spring (A) and remove the lifting eyes (B).
A
B
8. Start the engine.
9. Put the lift lever to the position (C) to lower the lift
arms.
C
D
WARNING: Do not put the lift lever
in the mow position (D). The hydraulic
force can cause serious injury.
10. Stop the engine.
11. Remove the 2 screws and the service hatch.
12. Lift off the rubber casing from the shaft joint.
13. Pull back the coupling of the drive shaft and remove
the drive shaft from the bevel gear shaft of the
cutting deck and from the PTO shaft.
14. Remove the lock chains.
15. Remove the pins (E) and the bolts (F) from the lift
arms.
E
E
F
F
To remove and install the cabin
1. Remove the cabin door. Refer to
To remove and
install the door on page 19
.
2. Remove the emergency door. Refer to
To remove
and install the emergency door on page 19
.
3. Remove the rubber straps and open the engine
cover.
4. Disconnect the battery.
5. Remove the service lid. Refer to
To remove the
service lid on page 30
.
6. Remove the cover of the fuse box. Refer to
To
remove the cover of the control box on page 31
.
7. Disconnect the cable for cabin control. The cable
has a black plug.
1593 - 006 - 14.11.2022
17
Loading ...
Loading ...
Loading ...