Loading ...
Loading ...
Loading ...
A ÷ L
ViewingtheCableCARDTM menu
A CableCARD T'_enables you to view encrypted digital channels.
See page 12 for connection and subscription information.
After the CableCARD '_'_is inserted, a CableCARD '_"option
appears in the Applications menu, with informational screens
provided by your digital CableCARD _'_service (see illustrations
below).
To view the CableCARD r" menu:
1. Press MENU and open the Applications menu.
2. Highlight CableCARD _"and press II,.
3. Press • or • to select one of the side menu items and press
ENTER to display the information.
TV Guide On Sc/een IP Service
A,d,oP,_yo,
;; Pict_J e Viewer CableCARD(tm) Status
Note: The CableCARD '_menu/s for #rfomrat/onal purposes
only and has no use/_adjustable options,
Settingthe QuickRestartFeature
With the Quick Restart feature set to ON, the TV will stay in
Low Power Shutdown mode for several minutes after the TV is
turned off (see Notes below).
If the TV is turned on from Low Power Shutdown mode, the
full picture appears immediately.
To set the Quick Restart feature:
1. Press MENU, and then press "_ or _" until the Setup menu
appears.
2. Press • or • to highlight Quick Restart, and then press lJ'.
3. Press • or • to select either "On" or "Off" and press
ENTER to display the information.
Note:
If Quick Restart/s set to Off and you turn off the TV,/t can take
several seconds for the picture to appear when you turn on the TV
again.
ff Quick Restart Lsset to On and you tuft7 off the TV, the following
will occur for 8 few minutes;
• The screen (/arnp_/ight,s dimly
• The fans continue to run,
Thisis a function of the Quick Restart Low Power Shutdown mode
and Lsnot a TV ma/function, If you do not prefer thLs,set the Quick
Restart feature to OfF
When the Quick Restart feature is set to Off, ff you repeatedly turn
the TV on and off in a short period of time, the useful service life of
the lamp may be sho/Ter than the average useful se/yice life See
page l O&
mM PORTANT NOTICE ABOUT
"HOT LAMP RESTART"
_/hen the TV has been poweled on long enough for the lamp onit
to get hot, it may take several minutes for the picture to appear
on=screen in the following situations:
• When the Quick Restart _Mfeature is set to OFF and you turn
the TV off and then on again within a few minutes.
• If the TV is on when a short=term power failure, power surge,
or other similar power failure occurs, such that the TV loses
and regains power within a few minutes.
This is a property of DLP TV lamp technology
and is ROT a sign of malfunction.
If this occurs, the green LED on the TV front panel will blink (and
the red LED will be lit solid) until the TV is finished restarting the
lamp and the normal picture appears. If BOTH green and red LEDs
are blinking at a one-second rate, you will need to turn the TV off
and then on again to restart the lamp.
Copyright © 2005 TOSHIBA CORPORATION All rights reserved.
51
HM95 R1 044-52 061505 51
B_ack
÷
6/24/05, 9:48 PM
÷
[
Loading ...
Loading ...
Loading ...