Loading ...
Loading ...
Loading ...
A ÷ L
Connecting a DVD Nayer with S=video,a VCR,and a CaNe box
_m will need:
¢ one signal splitter
¢ five coaxial canes
I, two sets of standard A/V cables
Note: ffyou have a mono VCR connect L/MONO on tile TV
(VIDEO 7) to your VCR_ atJO)T)out teerlisTd tJsisTgtile wITM
audio cabb on/jz
I, one S--video c_ble
one pair of standard audio cables
Note:
* Ifyour DVD pl_vyerdoes not have S vkleo, use a standmd
video c_,b/e insteacL Do not connect an S video cable and a
standard video cabb to VIDEO 1 (or VIDEO 2) at the same
time or #re picture peffom_anoe will be unac'c'ept_bb
* I@ou/DI/Dpl_d/erhaseonlponentvideoseepage17
* Do not connect the DVD player and VCR to the same set of
A/V klput:_ on the 71/:(See the iNustsation,whM} shows the
VCR connected i?J VIDEO 7 on the 71/,a/ld the DVD plJyer
connected to VIDEO Z)
D
53
TO view basic channels and access the TV's features:
Sdect the ANT 1 video input source,* Use the TV
controls to chmge channels and _ccess the TV's f:eatures,
TO view premium Cable channels:
Turn OFF the VCR. SeIec_the ANT 2 video input
source on the TM* "[Ltnethe TV to chanrld 3 or 4
(whichever channd the Cable box output is set to).
Use the (-;able box controls to change channels.
Note: When gnu use a C2ai/e box you rs?_J/not be able to
use the f_mote COf?tfe/ [o prog/_)ffl or access ce/tain
featu/_s on the TI/
53 To view the DVD player:
Turn ON the DVD player. Select the VIDEO 2 video
input source on the TV.*
53 To view the VCR:
Turn ON the VCR. Sdect the VIDEO 1 video input
source on the TV.*
* lb select the video input source, press IN PUT on the remote control
(see page 67), ]b program the %/remote control to operate other
devices, see Chapter 3,
The unauthorized recording, use, distribution, er revision ef
television programs, videotapes, DVDs, aud ether materials is
prohibited under the Copyright Laws of the Uuited States and other
countries, and may sabieet you to civil and criminal liability.
Dr# Nayer with S-video
Note: The I/IDEO/AUD/O OUT _rm/?Tals output s/9"naLsfrom the ANT 1,
ANT2, VIDEO L VIDEO 2, and VIDEO 3 tenn/ha/s when the appropnT_teinput
mode is selected
53 To enable the TV Guide On Screen _'_system to work with
your cable box and to use the TV Guide On Screen _'°
recording features:
1. Connect the G-LINK _>cable according to the instructions on
page 25.
2. Make sure the VCR is connected to the A/V OUT terminals
on the TV (see illustration).
3. Set the VCR to the appropriate line input (refbr to your VCR
owner's manual fbr details), and then turn OFF the VCR.
4. See Chapter 5 fbr details on setting up the TV Guide
On Screen<_)system.
5. See Chapter 7 fbr details on using the TV Guide On Screen_)
system.
÷
6
HM95 R1 0 2-25 061505 16
Copyright ,{e;2005 TOSHIBA CORPORATION AiI rights reserved
6/24/05, 9:12 PM [
Loading ...
Loading ...
Loading ...