Loading ...
Loading ...
Loading ...
Lampunit replacement and care (co.t . ed
HOw tO repJace the Jamp unit (continued)
6, Carefully insert the new _amp unit straight into the TV unti_
it is hLlly seated
Note :
• Neversubj_ct_/_elHmpun/t_oexceaa/_d_ock
• Never toud7 tile I_smpi.Tit ¢flassor otlJerw/ke clef it di/_S
Doing so rrl_!yaffect the image quality and re&/oe the service/fie of
the bmp See '<Cleauingthe lump unit gbss" below
CLEANING THE LAMP UNIT GLASS
If you accklentailytouch the lamp unit glassor otherwise
get it dirty,wipe it with a lint-free ionscleaningcloth (such
as a clothfor cleaning camera lensesor eyeglasses).
CAUTION: NEvEe dean a hot lamp with
any type of flammable liquid or aemse_
cleaning agent. Many ordinary cIeaning agents
[such as glass deaners_ contain chemicals that m% ue
flammabfe at certain temperatures. It the tamp unit is not aN.wed
to cool for at least one [1) hour, such chemicals may ignite.
7. Using a rn mu_I Phiihps screwdriver, tighten the Fwo lamp
unit screws.
Note: Nand=tidhtell only. Do uot use an electivescrew&vet
--.
--...
Lamp unit screws
(use manual PHIlips screwdriver only) ':"
NOTE: Makesure the lampunit andscrews
are installedsecurely:otherwise,the TVmaynot
turn on andthe lamplife maybe shortened.
8. Re_tt _chthe Iamp unit door, rnaking sure to insert the hooks
on the Jeff side of the Jamp _fit door inside the opening in
the 'FV cabinet. _--
Insert the hooks inside
the TV cabinet opening.
Lamp unit door
9. Replace the thumb screwand hand-tighten.
10.
Lamp unit door
NOTE : Make sure
the lamp unit door is
installed seculely; otherwise,
the TV may not turn on.
Plug in the power cerd and turn on the TM After the initial
warrnup peried (which may take several seconds fi)r f:tflI
picture brighmess), the TV should operate norrnalI> If any of
the f;._llovdngconditions exist, turn off the TE unplug the
power cerd, and repeat steps 1-9 to ensure that the lamp unit
and lamp unit door are installed correcdy:
, No picture o D_rk picture "TV will not turn on
_[Ka_ier repeating steps 1-9, the problem still exists:
Call TACP Consurner Solutions at 1-8(}(}o631-38!1.
Disposing of the used lamp unit
, Place the used lamp unit ill the empE7 box from the new unit.
* Keep the larnp unit out of reach of children and pets.
z_ CAUTION: handle the unit with
Always lamp care.
The lamp unit in this TV was designed for safe replacement by
consumers; however, if the lamp unit is subjected to intentional or
accidental abuse (such as excessive mechanical abuse or handling by
children or pets), the unit may break, exposing sharp edges or pinch points.
* Dispose of the used larnp unit by the approved method fi.>r
your area.
NOTE : ThelampunitcontainsmercuryDisposalof mercurymay
be regulateddueto environmentalconsiderations.Fordisposalor
recyclinginformation,contactyourl,ca[ authoritiesor theElectronicIndustries
Alliance(v®vw.eiaaorg).
÷
HM95 R2 103-109 061505 105
Copyright =_)2005 TOSHIBA CORPORATION All rights reserved
÷
6/27/05, 6:40 PM
105
[
Loading ...
Loading ...
Loading ...