Loading ...
Loading ...
Loading ...
Lampunit replacement and care (co.t ..ed
How to repJace the Jamp unR
_ WARNING: RiSK OFELECTRIC SHOCR._
TO REDUCE THE RiSK OF ELECTRICSHOCK, NEVER
REMOVE TV COVERS, EXCEPT AS SPED|NED
HEREIN. REFERALL SERViCiNG NOT SPECiFiED iN
THiS MANUAL TO QUALiFiED SERVICE PERSONNEL,
FaiMre to follow this WARNING may resuk indeath
or serious injul%
Required tools:
" Manual Phillips screwdriver
" Sof_, Hnt-ffee gIoves,
Optionam teem: 5/32" or 4ram Al_enwrench,
1, Turn offthe TV and unphg t}_epower cord,
W&RNING: Eyedamage may resuR from
directly viewing the J]ght prodaeed by this
tamp, Always turn off the TV and unplug the
power cord befole opening the lamp und dooL
2. STOP! Allow the lamp to cool for a le_t one (I) hot_r
before replacing it.
Touching the lamp before it has cooled will result in
severe barns, ALLOW THE LAMP TO COOL FOR AT
LEAST ONE O) HOUR BEFORE REPLACING if,
3, O,1 the lamp unk door o,1_heside of_he TV, loosen the
_humb screw by hind or by using a 5/32" or 4me Allen
wrench, and then remove _helamp unk door
TV back
Thumb
SCreW
Lamp unit door detail
4, Using a manuaI Phillips screwdriver,_oosenthe two screwson
the Iamp unk.
Lamp unit screws
WARNING:RISK OF
The lamp unit door is provided with an /
interlock to reduce the risk of electric shock and excessive
ultraviolet radiation. Never defeat its purpose or attempt
to service without removing the mamp unR door
completely. Failure to follow this WARNING may result in
death or serious injury.
5, Grasp the lamp unk hmdIe and gen_Iypull the lamp unk
straigh_ottt of the _ Set the old Iamp unit aside (see
"Disposingoldie used lamp elk" on page 105),
Note: Wear soft, Hnt-free
gloves when replacing
the lamp unit.
รท
Copyright ,g:2005 TOSHIBA CORPORATION All rights reserved
6/27/05, 6:40 PM [
Loading ...
Loading ...
Loading ...