Loading ...
Loading ...
Loading ...
Programmable functions
92
SmartGrid (only functional
in selected countries)
You can set your washer-dryer to start
automatically based on an external
signal within a certain time period.
If you have activated SmartGrid, the
sensor will have the new SmartStart
function instead of the Delay start
function.
Use the sensor to set a SmartStart
time period. The washer-dryer will then
start within the time period specified by
you when it receives an external signal.
If an external signal has not been
received by the latest start time set, the
washer-dryer will start automatically
(see “Delay start/SmartStart”).
Options
= Off
= On
RemoteUpdate
The RemoteUpdate function is used for
updating the software in your washer-
dryer. If an update is available for your
washer-dryer, it will automatically
download it. Updates will not be
installed automatically. They must be
initiated manually.
If you do not install an update, you can
continue to use your washer-dryer in
the usual way. However, Miele
recommends installing updates.
RemoteUpdate procedure
Information about the content and
scope of an update is provided in the
Miele App.
The message will appear in the time
display if an update is available.
You can install the update immediately
or postpone this until later. When the
washer-dryer is switched on again, you
will be reminded about the update.
The update may take several minutes.
Please note the following about the
RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch off the washer-dryer
during an update. Otherwise, the
update will be aborted and will not be
installed.
- Some updates can only be carried
out by a Miele service technician.
Loading ...
Loading ...
Loading ...