Loading ...
Loading ...
Loading ...
Warning and Safety instructions
9
The Miele water protection system protects from water damage
provided the following conditions are met:
- The machine is correctly plumbed in and connected to the
electricity supply.
- If a fault or damage has been identified, the washer-dryer must be
repaired by a competent person before further use.
The machine must only be connected to the on-site water supply
using a new hose kit. Old hose kits must not be re-used. Check the
condition of the hoses regularly so that you can replace them in
good time and avoid the risk of any water damage.
The water inlet pressure must be at least 100kPa and must not
exceed 1000kPa.
Faulty components must only be replaced by Miele original spare
parts. Miele can only guarantee the safety standards of the appliance
when Miele replacement parts are used.
If the connection cable is faulty, it must only be replaced by a
Miele authorised service technician to protect the user from danger.
This washer-dryer must not be operated in mobile installations
(e.g. on a ship).
Do not make any alterations to the washer-dryer, unless
authorised to do so by Miele.
Temporary or permanent operation with a self-sufficient or non-
mains synchronous energy supply system (e.g. isolated networks,
back-up systems) is possible. A requirement for the operation is that
the energy supply system complies with all current local and national
requirements that apply to stand-alone, solar and/or battery
systems.
The protective measures provided in the installation and in this Miele
product must also be assured in their function and operation in
isolated operation or in non-mains synchronous operation, or
replaced with equivalent measures in the installation.
Loading ...
Loading ...
Loading ...