Loading ...
Loading ...
Loading ...
Washing and Drying
50
5. Adding detergent
Dispense detergent with CapDosing
or via the detergent dispenser drawer.
6. Programme start/finish
Touch the flashing Start/Add laundry
sensor.
The door will lock.
The programme will start.
The Anti-crease phase will start at the
end of the programme.
The door remains locked during the
Anti-crease phase.
Touch the Start/Add laundry sensor
or turn the programme selector to the
position.
The door will unlock.
If you have unloaded the drum
during the Anti-crease phase, make
sure you spread out the laundry to
cool it down.
The door unlocks automatically at the
end of the Anti-crease phase.
Pull the door open and unload the
drum.
See "After each washing or drying
programme".
After each washing or drying
programme
Open the drum door fully.
Risk of burning due to hot metal.
The metal cap located on the inside
of the door glass will be hot after
drying.
Do not touch the metal cap.
Remove the laundry.
Laundry left in the drum could shrink,
discolour or be damaged in the next
washing or drying programme.
Check that all items have been
removed from the drum.
Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there. After drying,
remove any fluff from around the door
seal and the porthole glass.
Useful tip: For safety reasons, close the
door when the machine is not in use.
Otherwise there is a danger of objects
being placed inadvertently in the drum.
If these remain unnoticed and were
washed in the next load, they could
damage the laundry. An open door is
also a danger to pets and children.
Turn the programme selector to the
position.
Useful tip: Leave the detergent
dispenser drawer slightly open to allow
it to dry.
Loading ...
Loading ...
Loading ...