Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/75505895-wtd-160-wcs/bg14.png)
Before the first use
20
Setting up Miele@home
There are 2 ways of connecting:
1. Via the Miele@mobile App (default)
2. Via WPS
Signing on via the Miele@mobile App
Turn the programme selector to the
MobileStart programme.
appears in the time display. The
timeout time then starts to count down
from 10minutes in the time display.
The Miele@mobile App will guide you
through the remaining steps.
When you have successfully connected,
will appear in the time display.
Signing on via WPS
Turn the programme selector to the
MobileStart programme.
Touch the sensor until
appears in the time display and a
short keypad tone sounds.
The timeout time then starts to count
down from 2minutes in the time
display.
When you have successfully connected,
will appear in the time display.
Useful tip: If the connection has not
been set up when the timeout has
finished counting down, repeat the
process.
Running the first wash
programme
Damage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washer-dryer
and to adjacent cabinetry or
appliances.
Remove the transit bars as described
in “Installation”.
Before first use, the Cottons
programme must be run without
laundry and without detergent.
Turn on the tap.
Turn the programme selector to
Cottons.
The washer-dryer is switched on and
the temperature 90°C lights up on the
control panel.
Touch the Start/Add laundry sensor.
The programme will start.
After 10minutes, the indicators dim,
except for the Start/Add laundry
sensor.
Loading ...
Loading ...
Loading ...