Loading ...
Loading ...
Loading ...
Washing and Drying
49
Washing and drying in one
continuous sequence
It is advisable to wash and dry in a
continuous sequence when the
amount of laundry to be washed does
not exceed the amount to be dried,
and the amount to be dried does not
exceed the permitted dry weight for
the programme.
It is essential to read the sections
“Washing” and “Drying”.
1. Preparing the laundry
Empty all pockets.
Sort the laundry according to colour
and type of fibre/weave.
Check the symbols on the care
labels.
2. Loading the drum
Open the door.
Check the drum for pets or foreign
objects before loading it with
laundry.
Unfold the laundry and load loosely in
the drum.
Detergent dispensing aids, e.g.
plastic dispenser balls, can melt
during the drying programme and
cause damage to the machine and
the laundry.
These dispensing aids must be
removed from the laundry before
drying.
Close the door.
3. Selecting a programme
Turn the programme selector and
select the required programme.
The control panel lights up.
Touch the Washing and Drying
sensors until both sensor controls are
brightly lit up.
4. Selecting programme
settings
Select the desired spin speed,
temperature and drying level.
The sensors for the selected settings
light up brightly.
The minimum spin speed cannot be
lower than 900rpm.
For some programmes the spin speed
cannot be changed.
Select Extras as required.
With the thermospin the spin speed
displayed for the wash cycle is used.
Select a Delay start time if required.
Loading ...
Loading ...
Loading ...