Loading ...
Loading ...
Loading ...
Problem solving guide
60
Programme cancellation and fault indicator light
Problem Possible cause and remedy
The fault indicator
light lights up. and
alternate in the time
display and the buzzer
sounds.
The water inlet is blocked or restricted.
Check whether the tap is turned on properly.
Check whether the inlet hose is kinked.
Check whether there is sufficient water pressure.
The filter in the water inlet is blocked.
Clean the filter.
The fault indicator
light lights up. and
alternate in the time
display and the buzzer
sounds.
The water outlet is blocked or restricted.
The drain hose has been fixed too high.
Clean the drain filter and the drain pump.
Check whether the maximum delivery height of
1m has been exceeded.
The fault indicator
light lights up. and
alternate in the time
display and the buzzer
sounds.
The water protection system has reacted.
Turn off the tap.
Call Miele.
and alternate in
the time display and the
buzzer sounds.
There is a fault.
Disconnect the washer-dryer from the electricity
supply. Switch off at the wall and withdraw the
plug from the socket, or switch off the mains
circuit breaker.
Wait at least 2minutes before reconnecting the
washer-dryer to the electricity supply.
Switch the washer-dryer back on.
Restart the programme.
If the fault message appears again, contact Miele.
Loading ...
Loading ...
Loading ...