Loading ...
Loading ...
Loading ...
Problem solving guide
61
Fault indicator light lights up at the end of a programme
Problem Possible cause and remedy
The indicator light
lights up.
Excessive foam has built up during washing.
Use less detergent next time and follow the
manufacturer's instructions on dosage given on
the packaging.
The indicator light
lights up and appears
in the time display.
A wash programme using a temperature above 60°C
has not been run for a long time.
Run the Cottons90°C programme using the Miele
machine cleaner or a multi-purpose powder
detergent.
This will clean the washer-dryer and prevent a build-
up of bacteria and odours.
The indicator light
lights up and appears
in the time display.
TheRinse out fluff programme has not been used for
a long time.
Start the Rinse out fluff programme as described
in “Rinse out fluff programme”.
The indicator light
lights up and appears
in the time display.
There is no laundry in the drum.
The load is too small. The laundry is still damp
because the residual moisture content in the laundry
cannot be measured.
In the future, use the Warm air programme for
small amounts of laundry.
The amount of laundry exceeded the maximum load
for the selected programme.
Observe the maximum loads listed in the
Programme chart.
Loading ...
Loading ...
Loading ...