Loading ...
Loading ...
Loading ...
Using theSabbathFeature.
(Designed for use on the Jewish Sabbath and Holidays.) (on some models)
TheSabbathfeature can be used for baking/roastingonly.It cannot be usedfor convection,broiling, self-cleaningor
DelayStart cooking.
NOTE:Theovenlightcomesonautomaticallywhenthedooris openedandgoesoffwhenthedoorisclosed.Thebulbmayberemoved.SeetheOven
LightReplacementsection.Onmodelswithalightswitchonthecontrolpanel,theovenlightmaybeturnedonandlefton.
ii;¸ bSr-q ¸
i ii ii Fq iiiiiii ii ilI
/ i; /i
When the display shows D the oven
is set in Sabbath, When the display
shows D C the oven is
baking/roasting,
How to Set for Regular Baking/Roasting
Make sure the dock shows the correct time of day and
the oven is off.
Ilq Touch and hold beth tile BROR HI/[O
ill
and BAKE pads, at the same time, until
tile display shows SE
NOTE: If bake or broil appears in the
displa_ tile BROIL Hl,/LOand BAKE pads
were not touched at tile same time.
Touch tile CLEAR/OFFpad and l)egin
aKain.
_] ap the OELAYSTARTpad tmtil SAb bath
appears in the display.
Touch tile STARTpad mid D will appear
in tile displa}_
[_ ouch the BAKEpad. No signal will
be gix en.
%
%
Using tile number pads, enter tile
desired temperature between 170°F
(77°C) and 550°F (288 C). N( signal
or tern perature will be given.
Touch tile START pad.
Atter a nmdom delay period of
approximately 30 seconds to 1 minute,
D C will appear in tile display
indicating that the oven is baking/
Teas/inT. ffD C doesn't appear
in tile displa}, start aKain at Step 4.
To adjust tile oven temperature, touch the
BAKEpad, enter the new temperature using
tile numl)er pads and touch tile STARTpad.
NOTE."Tile CLEAR/OFFend COOKING TIME pads
will flmcfion during tile Sabbath t(ature.
When the display shows D the oven
is set in Sabbath, When the display
shows D C the oven is
baking/roasting,
How to Set for Timed BaMng/Roasting - Immediate Start and Automatic Stop
Make sure the dock shows the correct time of day
and the oven is oK
F_ Touch and hold both tile BROIL HI/tO
i/i
and BAKE pads, at the same time,
until tile display shows SE
NOTE: If bake or broil appears in the
display, tile BROIL H/Iq.Oand BAKEpads
were not touched at tile same time.
Touch tile CLEAR/OFFpad and 1)egin
again.
_i_ Tap the OELaYSTARTpad until SAb bath
appears in the display.
E_ ouch tile STARTpad mid D will appear
in tile displa}_
V_ Touch tile COOKINGTIMEpad.
I7-t
%
Touch tile number pads to set the
desired length of cooking time between
] minute and 9 hours and 99 minutes.
Tile cooking time that you entered will
be displayed.
Touch tile START pad.
77 Touch tile BAKEpad. No signal will
be given.
[-_ Using the nmnber pads, enter
the desired tempentture. No signal
or temperature will be given.
[_ Touch tile STARTpad.
After a nmdom delay period of
approximately 2_}seconds to 1 minute,
D C will appear in the display indicating
that the oven is baking/roasting. If D C
doesn't appear in tile displa}, start again
at Step 7.
To adjust tile oven ten_pemture, touch the
BAKEpad, enter tile new temperature using
the number pads and touch tile STARTpad.
When cooking is finished, the display will
change flom D C to D and 0:00will appear,
indicating that the o_en has turned OFF1)ut is
still set in Sabbath. Remoxe tile cooked toed.
How to Exit the Sabbath Feature
i ii i
!ii/ii ii ii (
30
%
Touch tile CLE4R/OFFpad.
If tile o_,en is cooking, wait tOT a random
delay period of approximately 30
seconds to 1 minute, until only D
is in the displa}_
Touch and hold both the BROIL HI/LO
and BAKE pads, at the same time, until
tile display shows SE
Tap the BELAYSTART pad tmti112shdn
or no shdn appears in tile display.
_-_ Choose 12shdn, indicating that the oxen
will automatically turn off after ] 2 hours
or no shdn, indicating that the oven will
not automatically mrn off after ] 2 hours.
Touch tile STARTpad when tile option
[_ that you _<mt is in tile display (12sMn or
no shdn).
NOTE: If a power outage occurred while
the oven was in Sabbath, tile oven will
automatically mrn off and stay off even
when tile power returns. Tile oven
control must be reset.
Loading ...
Loading ...
Loading ...