KitchenAid KESC300BBL10 Official 30" Electric Slide-in Range

User Manual - Page 49

For KESC300BBL10.

PDF File Manual, 108 pages, Download pdf file

Loading ...
Loading ...
Loading ...
roubleshooting
PROBLEM POSSIBLE CAUSE WHAT TO DO
The display is There has been a power Reset the clock. (See page 24.)
showing "PF" failure.
A letter fol-
lowed by the
number shows
on the display
(for example
"E3", "FI")
The display is
showing "F5"
or "E3"
The key pads
do not operate
Press CANCEL/OFF. If the code
does not disappear, call for service.
(See "Requesting Assistance or
Service" on pages 50-51 .)
The power cord is not prop-
erly grounded.
See Installation Instructions.
Pads not touched long
enough, or not enough time
between each pad pressed.
The Control Lock has been
set.
The Sabbath mode has been
set. ("SAb" appears on the
display.
The range is not properly
grounded.
Hold down the pad a short time, and
allow a short time between each pad
entry.
Turn off the Control Lock by opening
the oven door, pressing and holding the
Control Lock pad for 5 seconds. (See
"Using the control lock" on page 20.)
Turn off the Sabbath mode by
opening the oven door, waiting up to
15 seconds, and pressing and
holding Number Pad 6 for 5 seconds.
Call an electrician to make sure the
outlet is well grounded. If it is well
grounded, and the key pads still do
not operate, call a service technician.
If none of these items was causing your problem, see "Requesting Assistance or Service" on
page 50 or 51.
49
Loading ...
Loading ...
Loading ...