Loading ...
Loading ...
Loading ...
Before You Call For Service...
Troubleshooting Tips
Possible Causes What To Do
Control signals after You forgot to enter a _ Touch the BAKEpad and desired temperature or
entering cooking time bake temperature or the SELFCLEAN pad and desired clean time.
or start time cleaning time.
Display goes blank A fuse in your home may be , Replacethe fuse or reset the circuit breaker.
blown or the circuit
breaker tripped.
The clock is in the _ See the Special features ofyour oven control section.
black-out mode.
Display flashes Power failure. . Reset the clock.
Unable to get the Oven control pads were _ The BROIL HI/LO and BAKE pads must be touched at
display to show SF" not touched properly, the same time and held for :3seconds.
" " TM
Probe appears m s is reminding you to . Enter a probe temperature.
the display enter a probe temperature
(onsome models) after plugging in the probe.
Power outage, Power outage or surge. . Reset the clock. Ifthe oven was in use, you must reset
clock flashes it by touching the CLEAR/OFFpad, setting the clock
and resetting any cooking function.
Steam from the vent When using the ovens, * This is normal.
it is normal to see steam
coming out of the oven
vents. As the number of racks
or amount of food being
cooked increases, the amount
of visible steam will increase.
"Burning" or "oily"
odor emitting from
the vent
Strong odor
This is normal in a new oven . To speed the process, set a self-clean cycle for a
and will disappear in time. minimum of 3 hours. See the Using the self-cleaning
oven section.
An odor from the insulation _ This is temporary.
around the inside of the oven
is normal for the first few times
the oven is used.
Fan noise
(on some models)
A convection fan may
automatically turn on
and off.
This is normal. The fan is designed to operate intermittently
to maximize cooking evenness.
The convection fan will operate during preheat
of the bake cycle. The fan will turn off after the oven
is heated to the set temperature. This is normal.
A cooling fan may _ This is normal on some models. The cooling fan will turn off and
automatically turn on and off. on to cool internal parts. It may run after the oven is
turned off.
Oven or cooktop will
not stay set
Function error
Disconnect all power for at least 30 seconds and then
reconnect power. If repeating, call for service.
38
Loading ...
Loading ...
Loading ...