Loading ...
Loading ...
Loading ...
Special features of your oven control. GEApp,ancoscom
Your new touch pad control has additional features that you may choose to use. The following are the features and how
you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain in the control's
memory until the steps are repeated.
To enter a special feature for either oven, you must first touch the upper oven BROIL HI/kO and BAKE pads at the same
time. The lower oven BROIL HI/kO and BAKE pads will not activate special features.
When the display shows your choice, touch the START pad.
Fahrenheit or Celsius Temperature Selection
Youroven control is set to usethe Fahrenheit
temperature selections,but you may changethis
to usethe Celsiusselections.
[] Touchthe upperoven BROILHI/L.Oand
BAKEpads utthe same time until the display
shows SF.
I-ffl Touchthe COOKTIMEand BROILHI/LO
padsat the sgmetime.Thedisplaywill show
F (Fahrenheit/.
[] Touchthe COOKTIMEand BROILHI/LO
padsagain at the sametime.Thedisplaywill
show C (Celsius).
[-_ Touchthe STARTpad.
_i_I_!!I__i!i_i!_:_i_ _iii_i_i__i_i:_i_ill_ii
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds
until the CLEAR/OFFpad is touched. This
continual 6-second beep may be cancelled.
To cancel the 6-second beep:
Touch the upper oven BROILHI/LO and
BAKEpads at the same time until the
display shows SF.
[]
Touchthe BROILpad. Thedisplay shows
CONBEEP(continuousbeep).Touchthe
BROILpad again. The display shows BEEP.
(Thiscancels the one beep every 6 seconds.)
r_ Touch the START pad.
(_ii_ii_iI _i__-_ !_iiiiii_ii__ii__ii
Tone Volume
This feature allows you to adjust the tone
volumes to a more acceptable volume. There
are three possible volume levels.
[Z] Touch the upper oven BROILHI/LO and
BAKEpads at the same time until the
display shows SF.
r_ Touch the COOKTIMEpad. The display will
show STDBEEP.This isthe middle volume
level.
Touch the COOKTIMEpad again. This
changes the volume level each time the
pad is touched, and a tone will sound to
provide an indication of the volume level.
Choosethe desired sound level (LOBEEP,
STDBEEP,HI BEEP,or OFF).
r_ Touch the STARTpad to activate the level
shown.
25
Loading ...
Loading ...
Loading ...