Loading ...
Loading ...
Loading ...
13 Status LCD
This display shows you your URSA Mini Pro’s essential settings at a glance, without needing
to open the internal touchscreen. This screen is designed to be visibleeven in bright
daylight. The following information is available:
Battery indicator
Audio metersCard indicatorIris
Low record
time remaining
FPS, Shutter Angle, White Balance
Record
indicator
Timecodes
ISO
Dropped
frame
indicator
Timecodes
Your URSA Mini Pro displays three timecodes. If you have an external timecode connected,
this will be shown under the ‘ext’ indicator in the top left of the status LCD. Your URSA Mini’s
internally generated timecode is shown next to this under the ‘gen’ indicator. Both the
external and generated timecodes are shown in hours, minutes, seconds and frames.
The larger, main timecode indicator displays your current timecode as either clip duration
or timecode. You can switch between these two display modes by pressing the ‘timecode’
button underneath the status LCD.
Battery indicator
If your URSA Mini Pro is running on battery power, this indicator displays remaining battery
life in 25% increments. Each of the battery indicator’s four bars corresponds to 25% battery
life remaining. When your battery drops below 20% charge, the color of the status LED, near
the record button begins to flash. It will alternate slowly between red and orange during
recording and alternate between white and orange during standby mode.
If the mains power connector is plugged into your camera, the battery indicator
shows as full.
FPS, Shutter Angle, White Balance
The ‘FPS,’ ‘SA,’ and ‘WB’ indicators display your camera’s current frame rate, shutter angle
and white balance. The ‘fps’ indicator shows the current sensor frame rate.
Formore information on sensor and project frame rates, see the ‘touchscreen controls’
section in this manual.
69URSA Mini Pro Control Buttons
Loading ...
Loading ...
Loading ...