Loading ...
Loading ...
Loading ...
Certified for Japan, certificate number: 209-J00204. This equipment contains specified
radio equipment that has been certified to the technical regulation conformitycertification
under the radio law.
This module has certification in South Korea, KC certification number: MSIP-CRM-BGT-BGM113
Hereby, Blackmagic Design declares that the product is usingwideband transmission systems
in 2.4GHz ISM band is in compliance with directive 2014/53/EU.
The full text of the EU declaration of conformity is available from
compliance@blackmagicdesign.com
Safety Information
The supplied AC to 12V DC power supply for Blackmagic URSA Mini, URSA Mini Pro and the
IEC power cable for Blackmagic Studio Fiber Converter, must be connected to a mains socket
outlet with a protective earth connection.
Blackmagic URSA MIni, URSA Mini Pro and Camera Fiber Converter are suitable for use
in tropical locations with an ambient temperature of up to 40ºC. Blackmagic Studio Fiber
Converter is suitable for use in tropical locations with an ambient temperature of up to 50ºC
Ensure that adequate ventilation is provided around the Blackmagic Studio Fiber Converter
and Camera Fiber Converter so that ventilation is not restricted. When rack mounting the
Studio Fiber Converter, ensure that the ventilation is not restricted by adjacent equipment.
No operator serviceable parts inside Blackmagic URSA Mini, URSA Mini Pro, Camera Fiber
Converter or Studio Fiber Converter. Refer servicing to your local Blackmagic Design
service center.
State of California statement
This product can expose you to chemicals such as trace amounts of polybrominated biphenyls
within plastic parts, which is known to the state of California to cause cancer and birth defects
or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
Blackmagic URSA Mini and URSA Mini Pro
During sunny conditions, consider shading of the camera to prevent exposure of the camera
or Lithium battery to extended periods of sunlight. Keep Lithium batteries away from all
sources of heat.
The 12V DC output connector is suitable to provide power to the Blackmagic URSA Viewfinder
or Blackmagic URSA Studio Viewfinder. When connecting other accessories to this connector,
ensure that the power consumption is less than 18W.
Blackmagic Studio Fiber Converter
To reduce the risk of electric shock, do not expose this equipment to dripping or splashing.
Useonly at altitudes not more than 2000m above sea level.
Blackmagic Camera Fiber Converter
Only use the converter when connected to the Blackmagic Studio Fiber Converter. Under
normal use, the converter is designed to receive hazardous voltages from the Blackmagic
Studio Fiber Converter.
296Safety Information
Loading ...
Loading ...
Loading ...