Loading ...
Loading ...
Loading ...
Symbol Name
Shows on the
display
Cause / Action
48 V batteries
overcharged
The symbol
shows.
The 48 V batteries are fully charged and no more charge
is accepted. For example when you go down a slope
when the 48 V batteries are fully charged. Start the hy-
brid drive to decrease the batteries level.
48 V batteries re-
serve
The symbol
shows.
The hybrid mode is disabled and the 48 V batteries re-
serve is used (<20%). The 48 V batteries can only be
charged with the power supply. Do not use the product
and speak to your Husqvarna servicing dealer if this
symbol shows.
PTO button indi-
cator
The symbol
shows.
The PTO button is engaged. Refer to
PTO (Power Take-
Off) button on page 9
.
The symbol is
yellow.
Incorrect start or stop procedure. Refer to
To stop the
product on page 35
.
PTO button indi-
cator
The symbol
shows.
The PTO button is engaged but there is no drive to the
blades or other equipment. Refer to
PTO (Power Take-
Off) button on page 9
.
Parking brake in-
dicator
The symbol
shows (red).
The manual parking brake is engaged.
OPC indicator
The symbol is
yellow.
The operator presence control (OPC) is engaged. For
example if the operator lifts from the seat. Refer to
Oper-
ator presence control (OPC) on page 9
.
The symbol is
red.
The seat microswitch is engaged and the PTO button
is engaged. The drive to the blades or other equipment
stops automatically. Refer to
Safety circuit on page 22
.
Service indicator
The symbol
shows.
Servicing is necessary. Speak to your Husqvarna servic-
ing dealer.
Fuel level
The symbol is
white.
The fuel level is in the correct range.
The symbol is
yellow.
The fuel level is low.
The symbol is
red.
The fuel tank is empty.
Bluetooth
®
The symbol
shows.
A Bluetooth
®
device is connected to the product.
Note: The symbols and the positions of the symbols
on the display can be different between different models.
64 1591 - 008 - 12.12.2022
Loading ...
Loading ...
Loading ...