Loading ...
Loading ...
Loading ...
6. At the end of operation or when you do maintenance
on the product, turn the main switch of the 12 V
electrical system to OFF.
To operate the product
1. Start the product. Refer to
To start the product on
page 34
.
2. Release the parking brake.
3. Carefully push down 1 of the speed pedals. The
speed increases the more the pedal is pushed down.
Use pedal (A) to move forward, and pedal (B) to
move rearward.
B
A
4. Release the pedal to brake. To brake harder, push
down the other speed pedal.
To select a drive mode
The product has 3 available drive modes (Comfort,
Standard and Dynamic). Standard drive mode is set
from the factory. The last selected drive mode is saved.
Note:
It is not possible to select a new drive mode
when you sit on the seat.
1. Stay on the right side of the product and make sure
that the OPC is not engaged. Refer to
Operator
presence control (OPC) on page 9
.
2. Turn the power key to the ON position.
3. Push and hold the start button for the electrical drive.
After 10 seconds, the battery level status bar and
battery level status % flashes.
4. Continue to hold the start button and turn the PTO
speed switch to select drive mode.
A
B
C
The battery level status shows which drive mode (A),
(B) or (C) is selected.
• (A) Comfort mode: 0-30%.
• (B) Standard mode: 0-60%.
• (C) Dynamic mode: 0-90%.
36
1591 - 008 - 12.12.2022
Loading ...
Loading ...
Loading ...