Loading ...
Loading ...
Loading ...
5. Do a check of the rear
parking brake. Make sure
that the spring is not
damaged and correctly
attached.
6. Install the transmission
cover.
To do a check of the electric
parking brake
1. Set the main switch to OFF.
Refer to
To stop the product
on page 35
.
2. Remove the service hatch.
Refer to
To remove the
service hatch on page 48
.
3. Examine the parking brake
cables for damage. Make
sure that the cable pins
are correctly installed in the
connector.
4. Install the service hatch.
5. Set the main switch to ON.
Refer to
To start the product
on page 34
.
6. Park the product on a hard
surface that slopes, keep the
product on.
WARNING: Do not
park the product on
a grass slope when
you do a check of the
electric parking brake.
7. Make sure that the product
cannot move. If the product
starts to move, contact an
approved service agent.
24
1591 - 008 - 12.12.2022
Loading ...
Loading ...
Loading ...