Loading ...
Loading ...
Loading ...
4. Move the lever for the auxiliary system forward and
rearward to adjust the cutting height.
Note: The selected cutting height is shown with
the numbers 1-7 on the cutting deck. Refer to the
table below.
Number Cutting height, mm/in
1 30/1.2
2 40/1.6
3 52/2
4 64/2.5
5 76/2.3
6 93/3.7
7 112/4.4
5. Adjust the parallelism of the cutting deck. Refer to
To adjust the parallelism of the cutting deck on page
57
.
To adjust the cutting height - R180
1. Park the product on level ground.
2. Apply the parking brake.
3. Move the lever for the hydraulic lift arms rearward to
fully lift the cutting deck.
4. Turn the power key to the STOP position.
5. Remove the locking pin on the adjustment lever for
cutting height.
6. Lift the adjustment lever for cutting height and pull
the lever horizontally.
Note: Refer to the table below for which cutting
height that agrees with which number.
Number Distance rings,
above/below
Cutting height,
mm/in.
1 3xA+3xB/0 30/1.2
2 3xA+2xB/1xB 40/1.6
3 3xA+1xB/2xB 50/2.0
4 3xA/3xB 60/2.4
5 2xA/1xA+3xB 75/3.0
6 1xA/2xA+3xB 90/3.5
7. Attach the locking pin on the adjustment lever for
cutting height.
8. Hold the front wheel with 1 hand and remove the
locking pin with the other hand.
9. Move the distance rings up or down, refer to the
table below. The distance rings have 2 thicknesses,
(A) is 15 mm/0.6 in. thick and (B) is 10 mm/0.4 in.
thick.
A
B
10. Attach the locking pin on top of the front wheel.
11. Do step 8-10 again with the second wheel.
1591 - 008 - 12.12.2022
39
Loading ...
Loading ...
Loading ...