Loading ...
Loading ...
Loading ...
5. Release the start button for the electrical drive.
To lower the cutting deck to the float
position
1. Start the electrical drive. Refer to
To start the
product on page 34
.
2. Move the lever for the hydraulic lifting arms forward
to lower the cutting deck to the float position.
3. Start the hybrid drive. Refer to
To start the product
on page 34
.
4. Pull the PTO button out to engage the drive on the
cutting deck blades.
To lift the cutting deck
1. Start the electrical drive. Refer to
To start the
product on page 34
.
2. If the cutting deck is engaged, push the PTO button
in to disengage the drive on the cutting deck.
3. Move the lever for the hydraulic lifting arms rearward
to lift the cutting deck.
To set the PTO speed
Turn the PTO speed switch to (A), (B) or (C).
A
B
C
• (A) Low speed.
• (B) Reduced speed.
• (C) High speed.
Note:
Refer to
Technical data on page 67
for the
PTO speed rpm.
To adjust the ground pressure of the
hydraulic lifting arms
The hydraulic lifting arms has a gas spring that helps to
increase or decrease the ground pressure from the pivot
wheel on the cutting deck.
1. Remove the cutting deck. Refer to
To remove the
cutting deck on page 29
.
2. Apply the parking brake.
1591 - 008 - 12.12.2022
37
Loading ...
Loading ...
Loading ...