Loading ...
Loading ...
Loading ...
4. Make sure that the electrical
system starts when you
push the start button for the
electrical drive.
5. Make sure that the engine
starts when you push the
start button for the hybrid
drive.
6. Make sure that the electrical
system comes off and the
engine stops immediately
when you turn the power key
to STOP.
Safety circuit
The engine can only be started
when:
•
The main switch is in the ON
position and the power key is
in the ON position.
The engine must stop in the
situations that follow:
•
The operator lifts from the
seat while the product moves.
•
The operator lifts from the
seat while the product is
stationary and the manual
parking brake is disengaged.
The drive to the cutting deck or
other equipment must stop in
the situation that follow:
•
The operator lifts from the
seat while the PTO button
is engaged and the manual
parking brake is engaged.
To do a check of the safety
circuit
1. Park the product on a level
surface with the engine on
and the manual parking
brake disengaged.
2. Carefully lift from the seat.
The engine stops.
3. Park the product on a level
surface with the engine on,
PTO button engaged and
the manual parking brake
engaged.
4. Carefully lift from the seat.
The drive to the cutting deck
or other equipment stops.
Do this check daily. If the
engine, or drive to the cutting
deck or other equipment does
not stop correctly, do not use
the product and speak to your
Husqvarna service agent.
To do a check of the forward
pedal and rearward pedal
1. Start the product. Refer to
To start the product on page
34
.
22
1591 - 008 - 12.12.2022
Loading ...
Loading ...
Loading ...