Loading ...
Loading ...
Loading ...
12
ASSEMBLY - STEP FOUR
1. Take the LEFT CONNECTING ARM (9) and slide the
axle through the rotation tube on the left pedal arm.
2. Secure the LEFT CONNECTION ARM (9) in place
with the LEFT CONNECTION BRACKET (15) and 3
BUTTON HEAD SOCKET BOLTS (91). Tighten with
the 5MM L WRENCH.
3. Connect the upper swing arm to the lower swing arm
with 3/8” × 2-1/4” Hex Head Bolt (113), Ø3/8” × Ø19
× 1.5T Flat Washer (115), Ø3/8” × 23 × 2.0T Curved
Washer (116), 3/8” × 7T Nylon Nut (114) fastened
rmly by positions as drawing.
4. Line up the socket joint at the end of the pedal arm to
the bracket on the bottom of the swing arm. Secure
together with the BOLT (90), WASHER (106) and
NUT (87). Tighten with the 13/14 WRENCH and the
12/14 WRENCH.
5. Repeat these steps on the right side.
Loading ...
Loading ...
Loading ...