Loading ...
Loading ...
Loading ...
9
ASSEMBLY - STEP ONE
1. Tilt the Elliptical to one side (you may want to place a
piece of Styrofoam or a block under the unit for support).
Install the 3 LEVELERS (81) to the underside of the unit.
Repeat this lever assembly on opposite side of the unit.
2. Press the 6 END CAPS (82) into the oval stabilizer tubes.
3. Attach the TRANSPORT WHEELS (80) to each bracket
with 2 BOLTS (92) and 2 NUTS (99). Partially tighten
with the 13/14MM WRENCH and 5MM L WRENCH. Over
tightening the hardware will prevent the wheels from
rotating.
4. Attach the ROLLER WHEEL COVERS (45) with 4
SCREWS (55). Tighten with the screwdriver.
Loading ...
Loading ...
Loading ...