Loading ...
Loading ...
Loading ...
11
ASSEMBLY - STEP THREE
1. Remove the foam from the console mast axles and the
plastic ties from the swing arm tube.
2. The swing arms will be labeled “L” for left and “R” for
right. Slide the WAVE WASHER (110) and LEFT SWING
ARM (5) onto the left console mast axle. The swing
arms have been pre-assembled at the factory to assure
a proper t. The t will be snug. Please do not force
the arm on the axle or use a hammer, as damage to the
bearings could occur.
3. Secure the swing arm to the mast with the BUSHING
WASHER (51) and the SOCKET HEAD CAP BOLT (89).
Tighten with the 8MM L WRENCH.
4. Snap on the decorative BUSHING COVER (79).
5. Repeat these steps on the right side.
Loading ...
Loading ...
Loading ...